In the olden times particular, the machines were of a simple nature, which is why there were few defects. And there were also no empirical values as to when it makes sense to carry out maintenance or inspection. But this maintenance strategy required little maintenance, as something is only done when the machine stops due to a defect or malfunction. But of course this also has decisive disadvantages. Reactive maintenance is a maintenance strategy in which maintenance measures are only carried out when something is defective or the machine comes to a standstill. Only those repair measures are carried out that are necessary for the machine to work again. One of the things that you must have noted is that earlier the machines were very plain and were built in an easy to understand manner. That is why the machines that were build earlier had less technical defect or no issues.
Maintenance & Intervals –
And based on verifiable observation traditional people used to make sense as to when to check or inspect the machine. But this maintenance strategy required hard work especially when the machine stop due to defect or mal-function. There is also another kind of maintenance, which is known as reactive maintenance in which the maintenance is carried out when there is a defect in the machine or the machine has become stands still. The preventive maintenance is a maintenance strategy in which maintenance measures are carried out at certain intervals. The intervals can be time-dependent, number-dependent or usage-dependent (depending on the type of parts). It is divided into the areas of inspection, maintenance and repair. During the inspection, visual checks or simple tests are carried out at defined intervals to check whether the settings and wear are still within the tolerance range. Typical for this are whether the belts are still well tensioned or guardrails can guarantee the correct spacing, and whether the stops are still in the correct position.
About Preventive Maintenance –
Also, whether there is a oil leak somewhere where it has no business, because a defect could also be looming here. A typical running or production noises are also a possible indication of imminent failures. A lot of experience is required for this in order to define the correct intervals for preventive maintenance. If you go to search about maintenance in online, you will get to see different kind of maintenance. Maintenance are of several kinds: However in this guide you will mainly come to know about one of the most important kinds of maintenance i.e. preventive maintenance and its benefits. Preventive maintenance is a kind of maintenance in which prior to the happening of the technical default or the failure in the machine or appliances the problem is fixed before hand. In another words preventive maintenance is a type of maintenance in which the technical defects or problems are identified before hand and it is fixed.
Popularity of Preventive Maintenance –
This is one of the reasons why preventive maintenance is popular in industries. The most pivotal advantageous of the preventive maintenance is that it lengthens the life span of the machines. It is very important to keep your machine and appliances in a good condition and that will allow it to run longer and lower the cost. The way companies make inform maintenance decision is through MTBF – which is known as meantime between failures. If you are able to track the data like MTBF then it will allow you to plan or decide praeventive instandhaltung at the right time before the breakdown of the machine. Another important benefit of preventive maintenance is the low risk of break down. You will be at risk for lost productivity and spoil reputation if you are waiting for maintenance after failure of the machine or appliances.
Proactive Work is Important –
There are about nine percent or less industrial equipment that wears out due to proper use, which means that there are ninety percent of the problems that can be avoided with good preventive maintenance. If you work proactively by scheduling the preventive maintenance then you can reduce the risk of your machine failing. It will give you a lot of peace of mind. Machine Maintenance in simple words means looking after the machines and identifying the problems like failures, wear & tear etc. in the machines and correcting the problems. Several maintenance technicians are there who do servicing of several machines systems and appliances where they use different methods and strategies, when they are working on the machines or the systems. For the technicians to be fruitful in their maintenance work, it is very important for the technician or the maintenance service men to know the different types of methods for maintenance and the ways in which they will be used. In this guide, you will come to know about the difference types of maintenance and its benefits and working.
